The Ultimate Guide to Fix ‘No Internet Secured’ Connection Error
If you find yourself unable to use the internet despite being connected to your WiFi network, you need to understand that there is a problem. You usually receive a message i.e. no internet secured.
When you notice a no-access option on your device, you would like to know further. Thus, you will click on the option, and find another message i.e. no internet access.
Of course, it’s really annoying as your device is properly connected to the available Wi-Fi network. But still, you get errors no internet secured or no internet access.
Now, you would like to learn how to get rid of this problem. For this, you need to keep digging this informative post.
No Internet Secured – Reset Windows 10 Network Settings or Configuration
If you are dealing with no internet access or no internet secured error messages while using your Windows 10, you need to learn how to remove them.
For this, you need to concentrate on confirming the configuration or settings of the Windows 10 network.
Let’s check out how you can do it.
Step-1: The key reason behind this error message is usually corrupt DNS caches. So, you need to configure it.
Step-2: Go to the start menu and click on PowerShell or Admin option from the list.
Step-3: You will be asked to allow this application to make changes, you need to choose the Yes option.
Step-4: Now, you need to enter the given below commands.
- Ipconfig / release
- Ipconfig / flushdns
- Ipconfig /renew
- Netsh in tip reset
- Netsh Winsock reset
Step-5: Having completed the aforesaid process, now you need to reboot your device.
Step-6: Now, check again whether you can access to internet or not.
Choosing Fixed DNS Server Can Help You Getting Rid of No Internet Secured Error Message
It’s seen that most of the time, this problem is usually attached to the DNS server. Here, you need to remember the fact that the DNS server simply translates the domain names to a specific IP address.
So, if the DNS server isn’t working, you won’t be able to access the internet. Therefore, you are likely to receive messages with no internet but secured or no internet access or secured.
Let’s check out how you can eliminate this DNS server error.
Step-1: You need to click on the properties option in your network adapter.
Step-2: Here, you need to double-click or tap on the internet protocol version i.e. TCP/IPv4.
Step-3: Now, click on the given DNS server options.
Step-4: Now, you need to write down preferred as well as alternate DNS server IP addresses.
Step-5: Now, hit on the OK option.
Step-6: Check whether you can access the internet.
Are You Still Getting No Internet Access or No Internet Secured Error? Now Install and Update Network Adapter
If you are still facing the issue, you need to re-install as well as update the network adapter.
Since you want to fix no internet, secured error,
You need to follow the stated below instructions:
- First, you need to uninstall the network adapter.
- Now, reboot your device.
- Now, you again need to re-install as well as update the network adapter.
- For this, you need to click on Windows Key plus X option.
- You need to choose the Device Manager option.
- Click on the Network Adapters option.
- Click on the Wireless network Adapter option.
- Here, here you will find uninstall device option.
- Now, simply reboot your computer or laptop.
- Check whether no internet secured problem is resolved or not.
If you notice that the above-mentioned method doesn’t work,
you need to follow stated below instructions to eliminate this problem:
Step-1: Visit the given device manager option.
Step-2: Choose the wireless adapter option.
Step-3: Click on the Driver Tab option.
Step-4: Here, you need to remember that the network adapter name should be 1 as well as deriver version should 2 chosen.
Step-5: Now, use another device to download the latest version of the desired driver.
Step-6: However, it’s true that you should go with the latest and updated driver, but it’s seen that often eliminating an older version would create an issue.
Step-7: So, you can also try an older version of the driver.
Have You Disabled Wi-Fi Hotspot/Wi-Fi Sharing?
If you are still getting an error message with no internet secured, you need to confirm whether you have already disabled the Wi-Fi hotspot or Wi-Fi sharing software or not.
Here, you need to remember that Wi-Fi sharing and Wifi hotspot software may create configuration issues. So, you could start receiving messages i.e. no internet secured.
So, you are advised that you should eliminate any sort of non-Microsoft tools or software from the given network adapter.
Let’s follow the given below steps to complete the process.
Step-1: Click the Windows Key Plus X option.
Step-2: Choose the network connections option.
Step-3: Go to the given change adapter settings.
Step-4: Choose the wireless network option.
Step-5: Click on properties.
Step-6: Now, you need to disable all activated non-Microsoft stuff.
Step-7: Now, it’s time to reboot your device.
How to Disable or Remove Internet Security Software to Resolve No Internet Secured Error?
It’s seen that due to the use of internet security software such as Norton internet security, Kaspersky security, and others, many individuals have to deal with no internet access secured option.
There is no doubt that these types of software may create issues for your internet access. So, before going through a further process of removing no internet secured error, you need to disable or remove internet security software from your device.
This way, you can easily access the internet again.
Have You Changed Power Plan Settings?
If you are getting no internet access secured error messages in Windows 10, you need to check whether you have changed your power plan settings or not.
Since power plans or energy saving in Windows 10 can alter components of your PC, you are likely to deal with no internet, secured message. It means that you won’t be able to access the internet.
Thus, in order to get rid of no internet access problem,
You need to correct power plan settings:
- Click on the Windows key + X option.
- Choose power options from the list.
- Click on the additional power settings option.
- Now, you need to choose the Change plan settings option.
- Go to the advanced settings option.
- Make changes to settings like Wifeless adapter settings, click on power-saving mode, and then choose the maximum performance option.
- You also need to do the same process for the given link state power system management option.
- Now, simply choose to apply the option to apply new settings in windows.
More From Us:
- How to Fix NVIDIA Control Panel Missing Issue [Ultimate Guide].
- How to Fix “System Thread Exception Not Handled” Error.
- How to Fix Connected to Wifi But no Internet Android Issue
- How to Fix the “SIM Not Provisioned MM 2” Error
- How to Fix “DNS Server Not Responding” Error?
Techemirate.com is a technology blog about gaming, PC, mobile, Windows, how to, and others. The objective behind setting up Tech Emirate is to help contemporary readers to find accurate information about the latest gadgets, technology, software, gaming, and many more.